Introduction
IZCO Electrical is a trusted local electrical contractor and a Grade ‘A’ government-accredited Level 2 Service Provider based in Sydney. Authorised with Ausgrid and Endeavour Energy, we specialise in emergency repairs and replacements of electricity meters, installation and replacement of private power poles, overhead and underground power line upgrades, Level 2 electrical installations, and general electrical maintenance.
We also provide a true 24/7 emergency service, ensuring that whenever disaster strikes, our team is ready to respond quickly and restore your power safely and professionally.
What is a Level 2 Electrician?
A Level 2 Electrician is a fully accredited expert trained to handle more complex electrical work than your standard electrician. They’re licensed to safely connect or disconnect properties from the power network and are qualified to install, repair, and maintain both overhead and underground service lines.
A Level 2 Electrician in Sydney is authorised under the Accredited Service Provider (ASP) scheme, meeting strict training, safety, and compliance standards set by the state.
With the right training and certifications, Level 2 electricians carry out all work in strict accordance with Australian safety standards and regulatory requirements, particularly when dealing with connections to the electricity grid.
There are classes – 2A through 2D – that outline the different types of electrical service work electricians can carry out. From running overhead or underground cables to installing meters and safely disconnecting power during upgrades, these classes help make sure the right person is doing the right job safely and by the rules.
- Class 2A: Covers installation, connection, and disconnection of overhead service lines. This includes setting up or relocating overhead cables from the network to a property.
- Class 2B: Focuses on underground service lines. Electricians in this class work on laying, connecting, and maintaining underground cables between the network and customer premises.
- Class 2C: Allows the installation and energising of whole current metering equipment. This applies to single-phase and three-phase meters used in most homes and small businesses.
- Class 2D: Involves disconnecting and reconnecting the electrical supply at the point of attachment. This is essential when upgrading switchboards or consumer mains safely.
Differences Between Level 1 and Level 2 Electricians
Not all electricians are qualified to handle the same type of work. In Sydney, electricians are classified into levels — mainly Level 1 and Level 2 — based on the complexity and risk involved in the jobs they are authorised to perform.
Understanding these differences is key to choosing the right professional, especially if your project involves power grid connections or service upgrades.
1. Authorisation
- Level 1 Electricians: Work mainly on constructing and maintaining public electricity infrastructure, like power poles, wires, and substations. Their clients are often energy providers, not private property owners.
- Level 2 Electricians: Licensed under the Accredited Service Provider (ASP) Scheme, they are authorised to connect homes and businesses directly to the electricity network. They handle services such as meter installations, live wire work, private poles, and electrical defect repairs.
2. Training
- Level 1: Complete basic electrical apprenticeships and training related to infrastructure work.
- Level 2: Undergo advanced training that includes working on live networks, complex electrical systems, and strict compliance with NSW regulations.
3. Scope of Work
- Level 1: Focuses on building and maintaining the large-scale network — think construction of new power lines and general supply upgrades for utility companies.
- Level 2: Works on private properties, providing services like meter upgrades, switchboard replacements, power reconnections, three-phase upgrades, and urgent defect rectifications.
4. Safety Protocols
- Level 1: Follows standard safety measures relevant to network construction projects.
- Level 2: Adheres to extremely strict safety protocols when working on or near live electrical systems, ensuring the safety of both workers and the public.
Services Offered by IZCO Electrical’s Level 2 Electricians
Power Poles Installation
We install sturdy private power poles for new builds, rural properties, and replacements for damaged poles — keeping your property safely connected to the grid. Whether it’s due to storm damage, ageing infrastructure, or development needs, we provide fast and compliant installations tailored to your site.
EV Car Charger Installation
We offer future-ready solutions by installing EV chargers at your home or business. As more Australians switch to electric vehicles, having a professionally installed EV charger means you get safe, efficient charging that meets both manufacturer guidelines and energy provider standards.
Single Phase to Three Phase Power Upgrade
Need more power to run heavy-duty equipment or large appliances? We upgrade your electrical system from single-phase to three-phase, essential for businesses, home workshops, and growing households demanding higher power loads.
Meter Installation
We provide complete metering solutions, including new meter setups, replacements, and relocations. Whether you’re setting up solar, subdividing a property, or updating an old unit, we liaise directly with your energy provider for a smooth approval process. We follow Australian Energy Market Operator (AEMO) guidelines to ensure a smooth and compliant approval process.
Switchboard Upgrades and Installations
We offer expert switchboard upgrades to replace outdated, hazardous units with modern, safe, and compliant installations. Replacing old ceramic fuses with RCD-protected switchboards significantly reduces fire risks and improves overall safety.
Reconnection or Permanent Disconnection
Whether you need to reconnect your property to the power grid or permanently disconnect it before demolition, we manage the entire process quickly and safely, completing all necessary paperwork with your distributor.
Temporary Power Supply (TBS) for Construction Sites
We provide temporary power solutions for construction sites, events, and developments — ensuring you have a safe and reliable power source from start to finish, no matter how big or small your project.
Overhead Powerline Installations Sydney
We offer safe, professional installation and repairs of overhead power lines to keep your home or business securely connected to the network. Our team handles everything from design to setup and compliance checks.
MPD Installation Service in Sydney
Our team handles Meter Protection Device (MPD) installations with precision, ensuring your metering system is safely protected and fully compliant with regulations set by your energy distributor.
Point of Attachment Repair & Installation in Sydney
We repair or install the critical Point of Attachment where your electrical service connects to your property, ensuring it’s safe, stable, and ready to meet your current and future power needs.
Defect Notice Repair
Received a defect notice from Ausgrid or Endeavour Energy? We provide fast, efficient repairs to rectify issues and take care of the compliance paperwork for you — hassle-free and on time.
No matter the size or complexity of the job, our Level 2 Electricians are ready to get it sorted — safely, quickly, and with all the right paperwork.
Call us today on 0470 123 811 or Contact us for expert advice.
From the first inspection to the final handover, our work is legally sound and visibly solid.
When Do You Need a Level 2 Electrician?
Searching for an electrician near me? It’s important to know when you need a licensed Level 2 Electrician instead of a general one — it could save you time, money, and avoid serious electrical hazards.
Here’s when to call in the experts, depending on your project:
For Homes (Domestic Projects)
If you’re a homeowner, you’ll need a Level 2 Electrician when:
- New Home Connections: Building a new house? You’ll need a Level 2 Electrician to safely connect your home to the main electricity grid.
- Upgrading Your Power Supply: Moving from a single-phase to a three-phase power system? Only a Level 2 Electrician is qualified to handle the upgrade.
- Metering Changes: Whether you’re installing a new meter or switching to a solar setup, proper installation and certification must be handled by a Level 2 professional.
- Emergency Electrical Repairs: If you have exposed wires, major power faults, or mainline issues, a Level 2 Electrician can resolve the problem safely and quickly.
For Businesses (Commercial Projects)
In a commercial setting, a Level 2 Electrician becomes essential for:
- Complex Installations: Large lighting systems, integrated security setups, or automation controls need the advanced skills of a Level 2 electrician.
- Electrical Upgrades for Renovations: When your building’s power needs to grow, whether for extra offices or new equipment, a Level 2 expert can upgrade your system to handle the additional load.
- System Diagnostics and Repairs: For complicated system faults, Level 2 Electricians have the technical knowledge to troubleshoot and repair without long business downtime.
For Industrial Sites (Industrial Projects)
For industrial projects, you’ll need a Level 2 Electrician to handle:
- High-Voltage Installations: Setting up or maintaining high-voltage equipment demands the specialised training of a Level 2 professional.
- Control System Installations: If you’re installing automated systems or upgrading manufacturing equipment, a Level 2 Electrician will set everything up safely and keep it running smoothly.
- Emergency Industrial Repairs: Power failures in factories and plants can lead to major losses — Level 2 Electricians provide fast, expert repairs to keep your operations moving.
Why It’s Risky to Hire a General Electrician for Level 2 Work
Hiring the wrong electrician can cause serious trouble, especially when it comes to Level 2 work. A general electrician isn’t authorised or trained to work directly with the electricity network — and if they attempt it, you could face big problems.
Unlicensed work on service lines can lead to compliance breaches, heavy fines, and even unsafe installations that put your home or business at risk of fires or major outages. Worse, if something goes wrong, your home insurance could be voided because the work wasn’t carried out by a licensed Accredited Service Provider (ASP).
When it comes to connecting to the grid, installing a private power pole, or upgrading your main supply, always use a certified Level 2 Electrician. It’s not just about doing the job — it’s about doing it safely, legally, and properly the first time.
How to Choose the Right Level 2 Electrician
Choosing the right Level 2 Electrician means your project will be completed safely, properly, and without unnecessary stress. Here’s what you should look for:
1. Licensing and ASP Accreditation
Ensure the electrician holds a valid Level 2 licence and is accredited under the NSW Accredited Service Provider (ASP) scheme. Only ASP-accredited electricians are authorised to work on network services like mains connections, disconnections, and metering.
2. Full Insurance and Relevant Certifications
Ask for proof of current public liability insurance and industry certifications. This protects you from potential damages, accidents, or liability issues during the work.
3. Proven Experience with Similar Projects
Look for electricians who have handled similar jobs — whether it’s overhead connections, underground cabling, private power pole installations, or defect notice repairs. Specific experience ensures better outcomes.
4. Knowledge of Local Energy Distributors
Electricians familiar with Ausgrid and Endeavour Energy processes can handle permits and compliance matters smoothly, helping avoid unnecessary delays.
5. Transparent Quoting and Safety Commitment
Choose an electrician who provides clear, detailed quotes with no hidden costs. A true professional will also prioritise safety — both during and after the work.
6. Strong Communication and Professionalism
Good electricians communicate clearly, respond promptly, and keep you informed at every stage. Professional behaviour early on often reflects the standard of workmanship you can expect.
7. Positive Reviews and Client References
Before committing, check online reviews or ask for client references. Feedback from past customers is one of the best ways to gauge the electrician’s reliability and service quality.
8. Emergency Service Availability
Electrical issues can arise unexpectedly. It’s wise to choose a Level 2 Electrician who offers emergency or fast-response services when needed.
Common Mistakes to Avoid When Choosing a Level 2 Electrician
Hiring the wrong Level 2 Electrician can lead to serious safety risks, financial losses, and legal troubles. Here are the key mistakes to avoid:
- Hiring an Unlicensed or Unaccredited Electrician:
Only a licensed, ASP-accredited electrician is legally authorised to work on electricity networks. Unlicensed work can put your safety and property at risk. - Ignoring Proof of Insurance:
Without proper insurance, you could be left paying for damages or accidents. Always confirm that your electrician is fully insured. - Choosing Based on Price Alone:
Extremely cheap quotes often mean compromises on safety, materials, or workmanship. Always balance cost with qualifications and reputation. - Failing to Check Experience:
Level 2 work varies greatly. Make sure your electrician has direct experience with the specific service you require. - Not Checking Reviews or References:
Skipping this step could lead to hiring someone unreliable. Always read reviews and, if possible, speak to previous clients. - Skipping Written Agreements:
Always get a detailed, written quote and agreement outlining the work, timeline, and costs. Verbal deals can easily lead to misunderstandings. - Not Confirming Emergency Support:
If urgent issues arise, you’ll want an electrician who offers emergency services. It’s best to confirm this before work begins. - Overlooking Future-Proofing Advice:
A knowledgeable electrician will help you plan ahead — whether it’s preparing for solar installations, EV chargers, or future home upgrades.
What to Expect When You Hire a Level 2 Electrician
Hiring a Level 2 Electrician should be a smooth and straightforward experience when you choose the right team. Here’s how it typically works:
- Initial Consultation: We’ll discuss your project and provide a free, clear quote.
- On-Site Inspection: For major jobs, a site visit is scheduled to assess any risks or specific requirements.
- Liaison with Distributors: If needed, we handle all paperwork and approvals with Ausgrid, Endeavour Energy, or Essential Energy.
- Safe Work Completion: All work is carried out to Australian standards, with safety as the top priority.
- Certification Provided: Once completed, you’ll receive all necessary certifications, so your property stays compliant.
- Ongoing Support: We’re available for any questions or future upgrades you might need.
Choosing a licensed Level 2 Electrician means less stress, full compliance, and work you can trust.
Why Sydney Locals Trust IZCO Electrical for Safe, Fast Service
When it comes to electrical work that’s connected directly to the power grid, it’s not something you want to take risks with. Whether you’re upgrading your meter, replacing a damaged power pole, or hooking up a brand-new build, you need a qualified Level 2 Electrician — and not just any sparkie will do.
At IZCO Electrical, we help homeowners and businesses all across Sydney with fast, fully certified, and insured Level 2 electrical services. But it’s not just about ticking the boxes — we’re known for getting the job done safely, quickly, and without any headaches.
Covering All of Sydney — Fast and by the Book
Wherever you’re located — from North Sydney to the Northern Beaches, including Mona Vale, Narrabeen, St Ives, Allambie Heights, Freshwater, Manly, Mosman, Dee Why, Seaforth, Forestville, Pittwater, Belrose, Balgowlah, and Frenchs Forest — our experienced team is ready to help.
We’re fully accredited and authorised with Ausgrid, Endeavour Energy, and Essential Energy, which means we’re licensed to work directly on the network, handle defect notices, and carry out emergency repairs quickly, safely, and legally.
Why Choose IZCO Electrical?
Hiring a Level 2 Electrician isn’t just about having the right licence — it’s about peace of mind. Here’s why so many Sydney homeowners, builders, and businesses keep coming back to us:
- Same-Day Emergency Response
- Upfront, Fixed Quotes – No Nasty Surprises
- Fully Accredited & Compliant with NSW Laws
- 100+ Verified 5-Star Reviews
- Real 24/7 Support – We’re Always Available
We don’t just patch things up — we make sure your property is safe, compliant, and future-ready for years to come.
Thinking About a Power Supply Upgrade? Here’s What to Know
With more homes using high-powered appliances and new tech like EV chargers, it’s no surprise that older electrical setups can struggle to keep up. If you’re renovating, installing an EV charger, or running big appliances, upgrading from single-phase to three-phase power could be exactly what you need.
Signs Your Home Might Need an Upgrade
Not sure if your current setup is enough? Keep an eye out for these common signs:
- Frequent power trips or blown fuses
- Lights dimming when large appliances kick in
- Powerboards and extension cords everywhere
- Can’t install new appliances like ducted air-con or EV chargers
- Planning to renovate or extend your home
If any of this sounds familiar, it’s worth booking a professional assessment. We’ll help you figure out if a power upgrade is the right move — and handle everything from start to finish.
Frequently Asked Questions About Level 2 Electricians
How long does it take to upgrade a switchboard?
Most switchboard upgrades are completed within a single day, depending on the complexity of the setup.
Is emergency Level 2 work available after hours?
Yes! We offer 24/7 emergency Level 2 services across Sydney to handle urgent repairs and outages.
Can you help with defect notice paperwork?
Absolutely. We handle all repairs, inspections, and submissions to the distributor so you don’t have to worry.
Do you install private poles in all areas of Sydney?
Yes, we cover all Sydney suburbs and can also service nearby areas for pole installations and replacements.
Can you upgrade my home from single-phase to three-phase?
Definitely. We’ll inspect your property, assess your energy needs, and carry out the upgrade safely and quickly.
Can a normal electrician upgrade my switchboard?
No. If it involves metering or connection, you need a Level 2 ASP.
Do you provide emergency services?
Yes! We’re available 24/7 across Sydney.
Conclusion
When it comes to electrical work that connects directly to the power network, choosing a qualified Level 2 Electrician isn’t just a smart move — it’s essential. From new home connections to urgent defect repairs, only a licensed and accredited professional can handle the job safely, legally, and efficiently.
At IZCO Electrical, our team of certified Level 2 Electricians is ready to help with everything from meter installations and power upgrades to private pole setups and emergency repairs. We work with all major distributors across Sydney and deliver fast, compliant, and high-quality service every time.
If you’re planning a build, renovation, or dealing with a sudden electrical issue, don’t take chances with your safety or compliance. Let an expert Level 2 Electrician take care of it properly.
Need reliable help today? Call us on 0470 123 811 or contact us to book a service or get a free quote!
